Great Work
Alan and his team at Ossett Moulding, took on a complicated cornice and ceiling repair in a bedroom of our Victorian home, and provided us with a first class virtually mess free, professional [...]
Cornice 181 – Large Highgate
Projection 148mm Depth 148mm Victorian in style New to our range 2018
Plain Circle Oval – Donna-Marie 256
Oval on Plan, 760mm by 560mm. Regular Decorative Profile. Modern in manufacture 2019
Short Notice
At very short notice to allow for a project to be kept to time they supplied and fitted with prompt attention. We are returning customers that are pleased with the materials and the service. [...]
The James Hammond Plaque
“The James Hammond Plaque” It all started with an e-mail enquiry from Amélie, I have in our attic a stone plaque of around 90 x 60 cm (see picture enclosed) which we would like to [...]
Test News Item
4[oug24piugr2ip4uhgf[o2i4hg[oi24hfg[oi24h5g[o24i5hg2[5
Plaque Looks Fab
Hi Alan The plaque is up and looks fab – we are very pleased with your job and thank you and Chris again very much! When we are back over Christmas we’ll paint it and send you a foto of the [...]
Panel Number 312 – Daisy Chain
Projection 20mm. Depth 45mm. Flower Enriched Profile. Cast Length 2m.
Sheet Design Number 449 Sandbags
Sheet Width 90 inches, 2275 mm., Sheet Depth 41 inches, 1040 mm. An "average" stone size is 300mm. long and 110mm. high - approximately.
Great Job
Yrs thank you for your invoice I will send a cheque. I am going to make it for £ Please give the young man who put it up for us a tip my wife said that he did a great job. Nice to see people [...]
Ceiling Rose 220 Baroque
Oval on Plan, 940mm by 650mm., 37 inch by 26 inch. Irregular Carved Rim Profile. Rococo in Style. This centre is not really "lacey", it's actually quite firm and solid, the lacy impression [...]
Ceiling Rose 217 Low Relief Leaf
Outside Diameter, 450mm. Plain Spun Rim Profile
Sheet Design Number 497 Arch Brickwork Headers
Sheet length, 2170mm., Sheet height, 970mm. Radius to follow later xxxxmm Brick Size is 210mm by 55mm Used on Peaky Blinders series 4 production
Sheet Design Number 499 Brick
Sheet length, 2170mm., Sheet height, 970mm. Brick Size is 210mm by 55mm
Sheet Design Number 498 Stretcher Eroded Brickwork
Sheet length, 2370mm., Sheet height, 1130mm. Brick Size is 245mm by 55mm
Sheet Design Number 496 Parsonage Brick
Sheet Design Number 495 Small Roof Tiles
Sheet Design Number 494 Large Slate Roof Tiles
Sheet Design Number 493 – Small Roof Tiles
Sheet length, 2350mm., Sheet height, 900mm. Tile Size is 150mm Width by 90mm Depth This was taken for a production called Gunpowder in 2017
Sheet Design Number 492 Herringbone Brickwork
Sheet length, 2250mm., Sheet height, 965mm. Brick Size is 215mm x 50mm x 5mm This was taken for a production called Gunpowder in 2017 "See more"
Sheet Design Number 491 Timber “Gunpowder”
Sheet length 76 inches, 2000mm., Sheet height 45 inches, 1090mm. Timbers on this sheet are typically 25mm. deep (high). This was taken for a production called Gunpowder in 2017 "See more"
Number 843 – Large Trapeize 3
Approximate (maximum) width 395mm. 15.5 inch. Approximate Length 1195mm. 47 inches.
Number 842 – Large Trapeize 1
Approximate Height 330mm. 13 inch. Approximate Width 395mm. 15.5 inches.
Number 841 – Small Trapeize 2
Approximate Height 440mm. 17 inch. Approximate Width 595mm. 23.5 inches.
Number 840 – Large Trapeize 2
Approximate (maximum) Width 490mm. 19 inch. Approximate Length 1195mm. 47 inches.
Number 839 – Large Trapeize 1
(Dimensions to be added when to hand) Approximate Height T.B.A.mm. x inch. Approximate Length T.B.A.mm. xx inches.
Number 838 – Large Swag and Drops
(Dimensions to be added when to hand) Approximate Height 200mm. 8 inch. Approximate Width 510mm. 20 inches.
Number 831 – Large Venetian Curve
(Dimensions to be added when to hand, note this is a “handed / one of a pair” – with item 830 above) Approximate Length 550mm. (22 inch) Approximate Height 165mm. (6.5 inch)
Number 830 – Large Venetian Curve
(Dimensions to be addded when to hand, note this is a “handed / one of a pair” – with item 831 below) Approximate Length 550mm. (22 inch) Approximate Height 160mm. (6.5 inch) [...]
Number 829 – Parisien Plaque
(Obviously part of the Casanova Parisien Set) Approximate Height 300mm. (12 inch) Approximate Width 250mm. (10 inch) This item is (just) visible in the small illustration between two Venetian [...]
Number 816 – Platelets
(Use with above item Nr. 815 “Plate” – usually one each side – in a straight, horizontal line) Approximate Height 110mm, 5 inches. Approximate Width 80mm, 3 inches.
Number 815 – Plate
(“Flat to wall” item, possibly use with “platelets” (below) – to be properly catalogued later, with other “Casanova” Parisien items) Approximate Height [...]
Number 814 – Sconce
(Very flat, low relief item – vaguely “Rococo” in design) Approximate Height 55mm., 2.2 inches. Approximate Width 265mm., 10.5 inches.
Number 813 – Small Centre
(Small item, as above item Nr. 812 above – but fits flat to wall – I think!) Approximate Height 160mm., 6 inches. Approximate Width 250mm., 10 inches.
Number 812 – Smaller Casanova Centre
(Fits over our Nr. 301 *Reeded Panel* moulding – as shown) Approximate Height 160mm., 6 inches. Approximate Width 170mm., 6 inches.
Number 811 – Smaller Benelux Centre
(Fits over our standard panel moulding – from our “High Ceiling” feature) Approximate Height 80mm., 3.2 inches. Approximate Width 100mm., 4 inches.
Number 810 – Smaller Casanova Trellis
(Forms part of wall feature network – from “Casanova” Parisien film set) Approximate Height 85mm., 3.2 inches. Approximate Width 350mm., 14 inches.
Number 809 – Mirror Centre
(Forms centre to our standard mirror *showroom* feature – use with some of our standard panel moulding) Approximate Height 230mm., 9 inches. Approximate Width 250mm., 10 inches. This [...]
Number 808 – Larger Casanova Bracket
(Forms decorative network to walls – “handed” with Nr. 807 above) Approximate Height 250mm., 10 inches. Approximate Width 390mm., 16 inches.
Number 807 – Larger Casanova Bracket
(Forms network on walls – this item is “handed” – with Nr. 808 below) Approximate Height 250mm., 10 inches. Approximate Width 390mm., 16 inches.
Number 806 – Casanova Reeded Panel Corner
(This matches / couples up to our standard panel moulding – Nr. 301 “Reeded” – also to flat panel) Approximate Height 200mm., 7.4 inches. Approximate Width 280mm., 11.1 inches.
Number 805 – Large Casanova Trellis
(This is a “stand alone” or “network” wall embellishment) Approximate Height 110mm., 4.4 inches. Approximate Width 390mm., 11.4 inches. This, admittedly poor – but I [...]
Number 804 – Small Benelux Centre
(This item fits over two of our standard panel mouldings – another “High Ceiling” item) Approximate Height 110mm., 4.4 inches. Approximate Width 390mm., 11.4 inches. This [...]
Number 803 – Medium French Bracket
(Part of “Casanova” Parisien set, wall decorations – is the opposite hand to Nr. 802 above – fits to timber flat band – possibly also to our standard panel moulding [...]
Number 802 – Medium French Bracket
(Part of “Casanova” Parisienne set, wall decorations – is opposite hand to Nr. 803 below – fits with timber flat band possibly also our standard panel moulding or timber [...]
Number 801 – Large Honeysuckle
(Fits flat onto wall – a “Casanova Venetian Set” item. We have a pattern, a cast but no production mould for this item.) Approximate Height 310mm.br /> Approximate Width [...]
Number 800 – Shield and Swags
Featured on “High Ceiling in Low Country” – this feature fits flat to background. Approximate Height 220mm., 8.7 inches. Approximate Width 400mm., 15.8 inches.
Tile Number 915 – Azteka
Approximately 20mm thick A “stone / stippled” faced tile Tile is approximately 500mm. square
Tile Number 913
Approximately 20mm thick Approximately 400mm square This is the only tile of this dimension we make.
Tile Number 911
Approximately 20mm thick Approximately xxxmm. square. We will obtain this dimension as soon as possible. Please don’t jumble these c.600mm tile designs up without consulting Ossett [...]
Tile Number 910
Tile is approximately 20mm thick Approximately 595mm. square Please think before you mix designs up
Tile Number 909
Tile is about 20mm. thick Tile is about 602mm. square. Designs don’t easily mix I really don’t like this design. To be honest – it is horrible. But if you like it I will be [...]
Tile Number 908
Tile is approximately 20mm. thick. Tile is approximately 602mm. square Please don’t mix these designs together lightly This one is also suitable for random or repetetive logos / similar [...]
Tile Number 907
This tile is approximately 20mm. thick. This tile is 601mm. square – approximately. Please don’t mix designs together without careful consideration.
Tile Number 906
Tile is approximately 20mm thick. Tile is 600mm. square (approximately). It is possible to mix SOME designs together – but ask first.
Tile Number 905
Approximately 20mm. thick, but check with Ossett Mouldings Ltd. first. This tile is approximately 598mm square. Please don’t mix tile designs together “willy nilly”.
Tile Number 914 – Wood
As above, this is an “English” themed, highly raised pattern faced tile This tile is made to – and easily mixes with tile design Nr. 912 above. As this second illustration [...]
Tile Number 912 – Ronnie
An English themed, highly raised pattern faced tile This tile is made to – and naturally mixes with tile design Nr. 914 below. They belong to, and work best with each other. Both tiles are [...]
Tile Number 916 – Azteka
An “Aztec / Mexican” themed, highly raised pattern faced tile This tile is made to – and easily mixes with tile design Nr. 915 below. That is simply a matching plain tile with a [...]
Tile Number 904 – Alhambra
These tiles have an enormousely complex, almost but not quite geometric Arabic face pattern. Can be applied to walls or ceilings, probably in “strings” or lines. We also have an [...]
Tile Number 903 – Arabic
These tiles have a textured, mottled finish to their face. Stagger them in “brickwork” pattern. Thickness approximately 20mm. Tile length xxxmm., height xxmm. Many, very different [...]
Tile Number 902 – Cloth Board
Thickness approximately 20mm, awaiting checking. This tile is approximately 597mm. square. This tile can also be “divided” in either direction. The central rectangular panels are [...]
Tile Number 901 – Spiral
Projection approximately 20mm, (1.0 inch). As with tile 900 above, this one is possibly suitable for rectangular columns, but will also require mitring or an angle fillet, please ask for our [...]
Tile Number 900 – Panels
This tile is approximately 599mm. square and it is particularly suitable for cladding rectangular or square columns. This tile can also be cut to approximately 300mm. units, for instance [...]
Sheet Design Number 486 – Large Coursed Stonework
Sheet Length 83 inches, 2170mm. Sheet Depth 45 inches, 1160mm. Stones on this sheet are approximately or typically 400mm. long and 180mm. deep (high).
Sheet Design Number 485 – Small Coursed Stonework
Sheet Length 79 inches, 2010mm. Sheet Depth 42 inches, Same 1080 mm. Stones on this sheet are approximately or typically 500mm. long and 110mm. deep (high). This sheet was also used on To [...]
Sheet Design Number 483 – Large Flat Stonework
Sheet Length 82 inches, 2080mm. Sheet Depth 42 inches, 1060mm.
Sheet Design Number 482 – Large Dressed Stonework
Sheet Length 91 inches, 2300mm. Sheet Depth 44 inches, 1125mm. Stones on this sheet are approximately or typically 400mm. long and 120mm. deep (high).
Sheet Design Number 480 – Slate Face
Sheet Length 77 inches, 1960mm. Sheet Depth 43 inches, 1130mm. Stones on this sheet are approximately or typically 400mm. long and 120mm. deep (high).
Sheet Design Number 479 – Brickwork
Sheet Length xx inches, 2000mm., Sheet Depth 900 inches, xxxxmm. Full bricks on this sheet dimension 200mm. long, 80mm. high - excluding mortar joints.
Sheet Design Number 478 – Breeze Block
Sheet Length 91 inches, 2310mm. Sheet Depth 38 inches, 960mm. These blocks are 470mm. long, height to be advised later.
Sheet Design Number 477 – Rough Stone
Sheet Length 74 inches, 1880mm., Sheet Depth 42 inches, 1065mm. Difficult to give typical dimensions for this irregular design, but I'm informed 215mm long, 120mm high is the best estimate possible.
Sheet Design Number 476 – English Bond
Sheet Length 82 inches, 2100mm., Sheet Depth 44 inches, 1110mm.
Sheet Design Number 475 – Smooth Stonework
Sheet Length 91 inches, 2310mm., Sheet Depth 38 inches, 965mm. Typical / average stone lengths on this sheet are 450mm. I don't have the height of courses but I will post it here soon. I [...]
Sheet Design Number 473 – Flemish Bond
Sheet Length 42 inches, 1070mm., Sheet Depth 91 inches, 2320mm. Full / complete bricks here are approximately 220mm long and 80mm high - excluding mortar beds. Note;- This sheet is "narrow [...]
Sheet Design Number 472 – Smooth Brickwork
Sheet Length 90 inches, 2280mm., Sheet Depth 41 inches., 1050mm.